You are here: Home Used Used Balast Regulator 26-3
Plasser Minima-2S

Rebuilt Balast Regulator 26-3

  The Kershaw 26-3 Balast Regulator has a one pass transfer plow, 36” (914mm) wide reversible wings, and a broom attachment making it a powerful machine for ballast shaping, shoulder profiling, and a variety of other track maintenance operations.

  The rebuild was in 1999 (Knox Kershaw).
  Axles and transmission: Works, Good mechanical condition .
  Engine: Works, Good mechanical condition .
  Hydraulic System, Electrical System, Air System: Works.
  The price is FOB Port of Bulgaria: For Price and More Information Call.


Total weight: 14,742 t
Broad Gauge Track: 1435 mm
Lenght: 10,643 mm
Wight: 3,175 mm
Height over top of rail: 3,175 mm
Wheels and Brakes: 610 mm Cast steel wheels bolted to each axle, single shoe per wheel brake assembly. Service brakes: air applied/spring released. Parking brakes: spring applied/air released.
Propel System:

Hydrostatic drive, variable displacement pump, fixed displacement motor, four speed transmission.

Engine: John Deere 6068T, 185 hp, 2400rpm
Transmission and Axles:

Propel motor powers a four speed transmission. Dual propeller shaft, two (2) spring-mounted industrial type axles equipped with no spin differential. Gear ratio is 6.14:1. Single control handle controls speed and direction in each range.

Travelling speed: 48 km/h
Electrical System: 12 volt dc negative ground, 120 amp alternator, 205 amp/hour battery, color coded and numbered wiring.
Air System:

Air compressor, engine oil lubricated, cam shaft driven, water – cooled, 566 liters free air volume @ 2200 rpm. System pressure is 100 psi (6.8 atm), 613 in. (9.8 liter) air tank. Service brakes are controlled by a manually-operated dump valve. System is also equipped with a dual tone air horn and safety relief valve.

Hydraulic System:

Engine-powered dual pump drive with clutch drives hydrostatic propel pump and double pump for controls and broom. Control circuit includes pressure beyond manual valves, electrically actuated control valves and radiator-mounted oil cooler. 100 mesh suction screens and 10 micron return filters. Electric emergency pump to operate selected circuits.


Fully enclosed, insulated, safety glass, dome light, front windshield wiper and pivoting seat. Cab access from either side of machine.


Fuel: 464 liters, hydraulic: 371 liters, engine crankcase: 11 liters, cooling system: 22.7 liters, pump drive: 4,2 liters, transmission: 1.9 liters, *Add 1.9 liters for filter.

  REM options:

 Kershaw 26-3 in action

  Photos Used Kershaw 26-3.

Recently Viewed Products

Product Search